Uf-s10 service manual




















Using a damaged cord can cause fire or electric. Stop operation immediately if your machine emits smoke, excessive heat, unusual noise, orabnormal smell, or if water is spilt onto the machine. These conditions can cause fire. Immediately switch Off and unplug the machine, and contact the authorized Panasonic. Do not disconnect or reconnect the machine while the power switch is in the On position. Disconnecting a live connector can cause arcing, consequently deforming the plug andcause fire.

When disconnecting the machine, grasp the plug instead of the cord. Pulling on a cordforcibly can damage it and cause fire or electric shock. When the machine is not used over an extended period of time, switch it Off and unplug it. If an unused machine is left connected to a power source for a long period, degraded insulationcan cause electric shocks, current leakage or fire.

Be sure to switch Off and unplug the machine before accessing the interior of the machinefor cleaning, maintenance or fault clearance. Access to a live machine's. For Your SafetyTo prevent severe injury and loss of life, read this section carefully before servicing the Panasonicmachine to ensure proper and safe operation of your machine.

These symbols are used to alert operators to a specific operating procedurethat must not be performed. These symbols are used to alert operators to a specific operating procedurethat must be emphasized in order to operate the machine safely. If you notice any unusualcondition, contact the authorized Panasonic dealer. The power cord is plugged firmly into the receptacle. The plug is not excessively heated, rusted, or bent. The plug and receptacle are free of dust.

The cord is not cracked or frayed. Operating SafeguardsDo not touch areas where these caution labels are attached to, the surface may be very hot and may causesevere burns. Do not place any liquid container such as a vase or coffee cup on the machine. Spilt water can cause fire orshock hazard. Do not place any metal parts such as staples or clips on the machine.

If metal and flammable parts get into themachine, they can short-circuit internal components, and cause fire or electric shocks. If debris metal or liquid gets into the machine, switch Off and unplug the machine immediately. Operating a debris-contaminated machine can cause fire or electric shock.

Do not try to alter the machine configuration or modify any parts. An unauthorized modification can causesmoke or fire. Consumable SafeguardsNever dispose of toner, toner cartridge or a waste toner container into an open flame. Installation and Relocation CautionsDo not place the machine near heaters or volatile, flammable, or combustible materials such as curtains thatmay catch fire. Do not place the machine in a hot, humid, dusty or poorly ventilated environment.

Prolonged exposure tothese adverse conditions can cause fire or electric shocks. Place the machine on a level and sturdy surface that can withstand the weight of the machine. The weight of the machine : When moving the machine, be sure to unplug the power cord from the outlet. If the machine is moved with thepower cord attached, it can cause damage to the cord which could result in fire or electric shock.

A magnet can activate themachine accidentally resulting in injuries. When copying a thick document, do not use excessive force to press it against thedocument glass. The glass may break and cause injuries. Never touch a labeled area found on or near the heat roller. It is equivalent to a handbook.

Cellphone manufacturers also providing a service manual or schematic diagrams of cellphone to their authorized service centers and persons. To read and understand a cellphone schematic diagram we must have some knowledge about basic electronics like resistors, capacitors, transistors, integrated circuits, etc. It has 6.

Where the Android Operating System is running, In addition to the user applications and games. Safety Precautions 2. Specification 3. Product Function 4. Exploded View and Parts list 5. Level 1 Repair 7. Level 2 Repair 8. Level 3 Repair 9. Reference Abbreviation. Schematic Diagram Service Manual.



0コメント

  • 1000 / 1000