While some Serial to IP Converters can be very simple devices, it is best practice to use one with advanced security functionality, data encryption, and user authentication to ensure network data transmissions, and access to network equipment is protected.
This enables a serial based application to communicate directly over an IP Network or Internet connection without changes to the application software. Tto ensure that the original serial data stream is received by the other end point, it is important that Serial to IP converters have sufficient processing power to handle high throughput serial data. Perle IOLAN's have the fastest processors avalable on the market today to ensure low-latency and no packet losses. The SC again, certified driver won't control the volume, but if I use the SC driver it works flawlessly.
Anyhow, I'd play around with the IP drivers and see if you like them. You can always switch over if serial is your thing. Oh also, do read the instructions carefully for the IP drivers. There are some settings on the Pioneer devices you'll want to make sure are correct so that it can properly power up on receiving an IP command, etc. Many IP driver used to be unreliable for some 'consumer' devices, some still are 'iffy' such as TVs some Blu-Ray players, so some hesitance by dealers isn't that surprising.
I always prefer using IP if available and working well, though there are exceptions example, Binary HDMI switches have IP drivers but I've found their serial drivers much more convenient. From a C4 perspective, serial or network both work very well, little direct difference - but it's easier to have enough ports on a network switch plus most devices should get a network anyway then it is to have lots of serial ports.
All work great. I use a bunch of both. My matrix switch, my projector and most of my TV's are controlled via serial. Work great! I've got another TV, and bluray player, Marantz receiver, etc I would lean towards preferring IP for the reasons stated above by Cyknight, but like SMHarmon says you better have a robust network if you're going to get a bunch of IP drivers.
Meh, you better have a robust network if you want a Control4 system. Spot on Cyknight. And this is why I think C4 should have a dedicated "Networking" training track for dealers. I have access to the C4 University and while I am happy they do require passing a certification in networking fundamentals, I would like to see this beefed up. If not for the help of folks on this forum thank you, wap , I would still be having spanning tree issues with my switch and sonos gear.
It was a quick fix and something that is known amongst the sonos tech folk, but my dealer that sold the sonos gear was not. It would be good if C4 beefed up their dealer networking stuff but I don't really think that would solve the issue. How do you know the guy who passed the "advanced networking" requirement is the same guy that shows up at your house? Until dealers step up and invest in training their employees nothing will change. Enough dealers are ok just getting by on that kind of stuff.
Also true. But Cedia certification is -not- a requirement to be a dealer, neither are Shawn's courses. Which does leave a lot of people out there doing installs and not just Control4 with little networking knowledge - and I'm sure you're aware Ryan that a LOT of support calls have always been about networking issues.
I prefer a serial driver over IP. Once the connection is established, the support technician can diagnose the problem and provide a resolution. When finished, the session which automatically terminates the connection to the peripheral device. However serial interfaces are still widely applied in industrial automation, security systems, and the IT industry. Thanks to this outstanding feature you can create a virtual connection through serial channels within a single room, a building and even globally.
HW VSP is a dedicated serial over IP software driver used for providing an operating system with virtual serial interfaces. A user just needs to specify the IP address and port number in the software settings.
Although this driver can be used as a stand-alone app, it often comes together with a hardware RS over IP converter e. When used together with the hardware, HW VSP software allows changing the connection parameters like the speed and parity, controlling all digital outputs and inputs, and more.
Serial to Ethernet adapters allow you to share COM ports over the network without using any programs for the computer, which saves the cost of software development. The problems that can be solved using Serial Servers can be divided into local and network ones. The first type covers issues related to connecting a certain device via a serial interface to a workstation not equipped with a COM port. The second type can be described as sharing serial interfaces or COM-based equipment over Ethernet network.
Hardware Serial to Ethernet converters is a wide class of devices which are included in the product range of many manufacturers of communication equipment. These solutions can be called RS to Ethernet adapters, consoles, or device servers and can fit a different number of serial ports depending on the model.
NetPort by L-com is a 1-port serial server. The solution offers a built-in web server which allows any device to which it is connected to be assessed and monitored via a standard Internet browser. This converter easily connects RS interfaces and serial-based equipment to the Ethernet IP network.
Also, you can try to connect your serial devices to a wireless LAN. This 2-port adapter will help you interface serial equipment to an IEEE This solution comes with a built-in WLAN site survey tool and supports offline port buffering and serial data logging. One of the first applications of serial communications was the sphere of industrial automation where various sensors and data loggers exchanged data with computers via RS, RS, and RS ports.
The direct serial connections, however, have some limitations like the speed of data transfer, distance, and accessibility. So users required an efficient alternative, a more flexible way to communicate data between serial equipment. What came to the rescue was Ethernet standard. Ethernet technology is still going strong in industrial markets.
It allows connecting wired local area networks LANs , enabling devices to communicate with each other via a serial communications protocol. With the spread of Ethernet in the industrial sector, a tendency has emerged of unifying the network for managing not only workstations but also a wide variety of electronics.
Ethernet has been gradually replacing specific industrial interfaces, including the very common RS, RS, RS ports.
On the new models of industrial automation tools, you can often see the LAN port. Nevertheless, many COM-based automation tools are still in use and continue to be mass-produced. So it is logical that the manufacturers of communication equipment have decided to "link" serial interfaces and Ethernet technology. The efforts of the developers did not stop there, however. And Serial to Ethernet technology is now delivered as a part of dedicated software apps.
With a dedicated app, you can turn your home computer into a serial device server with multiple remote clients. Electronic Team, Inc. By continuing to use this site, you agree to our cookie policy.
0コメント