Chair rails are still used today to create a more formal and traditional design. If the furniture is lighter in value, the wall color below the chair rail can be darker. It is easier to trim a little extra than to replace missing material. Molding for chair rails may not always be sold as such. If you think molding of a particular shape would look good as a chair rail, use it, even if it is labeled for use as a baseboard.
Installing wainscoting may seem like a complex job, but DIY wainscoting is an approachable option for beginners. The overall wainscoting cost is also greatly reduced if you do the work yourself instead of hiring a pro. This guide will explain how to create an easy DIY recessed panel wainscoting look in your home.
Wainscoting adds so much charm to even the smallest homes that they become irresistible to home buyers. A house is not exclusively a financial investment. What is the proper height for wainscoting? Generally, the cap sits about one-third the way up the wall. So if the ceiling is 9 feet, go for 3-foot wainscoting. For taller wainscoting, such as one with a plate rail, cap it two-thirds the way up the wall. Use a color, such as black, that matches the edges of the panels.
If you plan on covering paneling with fresh drywall, you can stick mesh drywall tape over the seams to hide them. Spread joint compound over the tape before painting.
For centuries, builders and homeowners have installed wainscoting to protect their walls from chair or table damage, scuff marks from footwear, and other damaging elements.
Beadboard: Vertically grooved panels that have a traditional style. Raised Panels: Deeply beveled squares or rectangles in panels for a classic look. Flat Panels: Smooth panels that have a modern look. For example, a raised panel wainscoting gives a room a more formal appearance. SeniorCare2Share Care about seniors? Have knowledge? Care to share? Table of Contents. We used liquid nails to glue the board to the wall and a nail on either end to secure the board while the glue dried.
Then we placed another board horizontally on top of the three vertical boards. To give it the finished look of real wainscoting we installed a 1 in.
MDF board flat across the top of the horizontal board to act as a chair rail. We used caulk to fill in all of the gaps between the boards and the wall and after allowing the caulk to dry, gave it a final coat of white paint. What a huge difference it made!
This rail will serve as a guide for installing the wainscoting panels. Next, you will need to attach the wainscoting panels to the rail. The panels should be spaced evenly apart, and you should use panel adhesive to attach them to the rail. Make sure that the panels are level before you allow the adhesive to dry. Once the adhesive has dried, you can install the cap molding. This molding will cover the top of the wainscoting panels and conceal any gaps between them.
Use a miter saw to cut the molding to the correct length, then attach it to the wall with panel adhesive. Installing tongue and groove wainscoting is a little different than using MDF or panels but is still a relatively easy project that can be completed in a weekend. Decide on the placement of the wainscoting. Measure and mark the placement of the first board. Be sure to measure from the floor up, not from the bottom of the board. Dry fit the next board by fitting it into the groove of the first board to make sure the cut is good.
Remove the board, apply the wood glue and replace the board, nailing it in place. This will help to ensure that your wainscoting is even and looks professional. Install the chair rail by cutting it to the correct length and nailing it to the wall at the top of your wainscoting. The chair rail acts as a nice mask for the grooves and gives your wall an overall more finished look. This will protect the wood from damage and will help to keep it looking new for years to come.
Be sure to use a high quality paint or finish that will be able to withstand daily wear and tear. Paint and finishes made for cabinets and trim work should be used on wainscoting because they are designed to hold up under high humidity. If using paint, a high quality paint spraying is great for getting into the grooves and corners. You can also use a roller and paint brush to paint your wainscoting, but it may take a little longer. Apply at least two coats of paint or finish for optimal protection.
Allow the first coat to dry completely before applying the second. To stain your wainscoting, use a stain blocking primer first. This will neutralize the wainscoting, making it safe to apply the stain. Use a rag to apply the stain, and be sure to wipe off any excess before it dries. Apply at least two coats of stain for optimal results.
Installing wainscoting in a bathroom can add some much needed character to a bathroom. It is also a great way to protect the wall from water damage and mildew. But you will want to use wood or vinyl wainscoting and avoid MDF as it will absorb the moisture. In conclusion, wainscoting is a great way to add some character and protection to your walls. There are a variety of materials that you can use, including wood, MDF, and vinyl.
The cost varies depending on the supplies and the size of your space but now that you know how to install wainscoting, it can usually easily be done in a weekend! Our entryway really pops now and the wall is a beautiful focal point when you first walk in the door, making the space really welcoming. Skip to content Love it? Share it!
Share Pin. Previous Previous.
0コメント